5.
Attach latch bracket to the front of trailer body using the 3/8 x 1” bolts, washers and nylock
nuts.
6.
Attach tipper latch to the trailer tongue using the middle set of holes in the tongue. Secure with
3/8 x 2 3/4” bolts and 3/8 nylock nuts. Flipping the latch lever up will make it easier to fit a
socket on the bolt. Move the tipper latch in the slots so there is just enough room for the catch
to clear the bracket. Tighten securely once the proper mounting position is achieved.
7.
Insert pin coupler into the tongue and fasten securely with the 3/8 x 2 ½” bolt and nylock nut. It
may be necessary to tap the pin coupler into place with a hammer.
3/8 x 1”
bolt
attaches
here.
3/8 nylock nut and washer goes here
on the inside of trailer body.
Lever flipped up.
3/8 x 2 3/4” bolt and nylock nut
Gap between tipper latch and bracket
should be just enough to allow it to work.
