Installation / Operation Manual
Model : VSDS-RVM4.3
Rearview Mirror with 4.3” TFT-LCD Inbuilt Monitor
& Number Plate Camera
This kit contains all you need to enable safe reversing with confidence, virtually eliminating blinds
spots. The Monitor/Mirror simply fastens over your vehicles existing rear view mirror and the
camera is mounted above your Number plate. When reverse gear is selected, a colour video
image is instantly displayed on the in-
built 4.3” TFT LCD screen showing the rear view from the
camera
Notes for Automotive Installation
Check the vehicles electrical system thoroughly
before
commencing installation.
Solder
all connections, and then
insulate
with insulation tape.
Use a
multi - meter
to verify any wires nature.
Important:
If the installer does not have a concise knowledge of the vehicle’s electrical system,
it is strongly advised not to aimlessly probe to find the necessary wires. Doing so may damage
your vehicles electrical system. Consult with your veh
icle’s manufacturer, or a qualified Auto
Electrician. Rhino accepts no responsibility if an installer wires the product incorrectly or damages
the vehicle during installation
.
1 x 4.3” Display