RHINO TURF FLEX Скачать руководство пользователя страница 113

TO THE OWNER/OPERATOR/DEALER

Keep children away from danger all day,
every day...

Equip tractors with rollover protection (ROPS)
and keep all machinery guards in place...

Please work, drive, play and live each day with
care and concern for your safety and that of
your family and fellow citizens.

To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the
Safety Messages in this Manual.  The Table of Contents clearly identifies each section where you can easily find the
information you need.

The OCCUPATIONAL SAFETY AND HEALTH ACT  (1928.51 Subpart C)  makes these minimum safety requirements
of tractor operators:

REQUIRED OF THE OWNER:

1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and
2. Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and
3. Ensure that each employee uses such Seatbelt while the tractor is moving; and
4. Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected area

provided by the ROPS.

REQUIRED OF THE OPERATOR

1. Securely fasten seatbelt if the tractor has a ROPS.
2. Where possible, avoid operating the tractor near ditches, embankments, and holes.
3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going - especially at row ends, on roads, and around trees.
6. Do not permit others to ride.
7. Operate the tractor smoothly - no jerky turns, starts, or stops.
8. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.
9.  When the tractor is stopped, set brakes securely and use park lock, if available.

Содержание TURF FLEX



















































































































Отзывы: