manualshive.com logo in svg

RHINO TURBO120 TURBO120, Руководство оператора

Поделиться
Скачать
RHINO TURBO120 TURBO120 Скачать руководство пользователя страница 132

OPERATION

Turbo 120   01/11

Operation Section 4-22

© 2011 Alamo Group Inc.

OPERA

T

ION

•

Perform scheduled lubrication as detailed in the maintenance section.

•

Ensure all decals are in place and legible. 

•

Ensure the driveline is securely attached to
tractor.  Make sure the driveline yoke locking
collar is securely seated in the grooves of the
PTO shaft by pushing and pulling the yoke
several times.

•

Lift and Semi-Mount Type-Inspect that the 3-
point hitch pins are the proper size, correctly
installed, and secured to the tractor lift arms
with retaining pins inserted.

•

Pull Type-Inspect that the hitch bolt is the
correct size, that washers are inserted between
the drawbar and hitch clevis, and the locknut is
securely tightened.  

OPS-R-0008_F

•

Ensure deflectors and/or chainguards are in
position and not damaged.  Replace worn,
broken, and missing pieces.  

OPS-R-0038

All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition.  All safety
devices should be inspected carefully at least daily for missing or
broken components.  Missing, broken, or  worn items must be
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact. 

(SGM-3)

Содержание TURBO120 TURBO120











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды