Rhinotracks ST-5 User Guide
- 4 -
5
First Use
5.1
Indicator
Press and hold down the power button for 3s to 5s to start the ST5.
GPS Indicator (Blue)
Blink (every 0.1s)
The ST5 is being initialized or the battery power is low.
Blink (0.1s on and 2.9s off)
A GPS signal is received.
Blink (1s on and 2s off)
No GPS signal is received.
4G Indicator (Green)
Steady on
Strong 4G connection
Blink (every 0.1s)
The ST5 is being initialized.
Blink (0.1s on and 2.9s off)
A base station signal is received.
Blink (1s on and 2s off)
No base station signal is received.
6
Installing the ST5
6.1
Installing an I/O Cable
The I/O cable is a 12-pin connector which we are only using power and ignition input.
1
Power (+)
3
Not Used
5
Not Used
7
Input 3
9
Not used
11
Not used
2
GND (-)
4
Not Used
6
Not Used
8
Not Used
10
Not Used
12
Not Used
Pin Number
Color
Description
1 (Power +)
Red
Positive electrode of the power input, connected to the positive electrode of
the vehicle storage battery. Input voltage: 11.4 V to 36 V. 12 V recommended.
2 (GND)
Black
Ground wire, connected to the negative electrode of the vehicle storage
battery or to the negative terminal.
3 (Input 1)
White
Digital input 1, negative trigger (SOS button by default)
4 (GND)
Black
Ground wire, connected to input 1 (SOS button)
5
Not Used
6
Not Used
7
Not Used
9
Not Used
11
Not Used
