Application Instructions 1
4
Operating Instructions
Application Instructions
Safety
This applicator is a quality product for the professional user; it is designed
for high duty cycles over long operating periods. As compressed air is
used as the power source, operator fatigue is minimal, but it must be
remembered that compressed air can be dangerous when used incorrectly.
The user should take time to read and understand these operating
instructions fully.
Always
• USE PROTECTIVE EYE & EAR EQUIPMENT WHEN OPERATING.
• DISCONNECT THE AIR SUPPLY BEFORE STARTING ANY
MAINTENANCE / CLEANING TASKS.
• WEAR PROPER PROTECTIVE CHEMICAL RESISTANT SUIT,
SUPPLIED FRESH AIR FULL FACE MASK, NITRILE GLOVES AND
SHOE COVERS.
Never
• CONNECT THE APPLICATOR TO AN AIR SUPPLY WHICH CAN
EXCEED 145 PSI (10 BAR).
• IMMERSE THE GUN INSOLVENT.
• OPERATE THE GUN WITH LOOSE, BROKEN OR MISSING PARTS.
• CARRY THE GUN BY THE AIR PIPE.
• USE DAMAGED CARTRIDGES OR THE WRONG TYPE OF
CARTRIDGE IN THE APPLICATOR.
Operating Instructions
Air Connector
[
E
]
Connect an airline to the cartridge gun using the supplied quick connect or
with a fitting that has a compatible screw thread.
Load Cartridge Pack
1. Ensure the plungers on the cartridge gun are fully retracted.
2. Drop the cartridges into the frame assembly by placing the rear of the
cartridges over the plungers and then lowering the front of the
cartridges into the front plate.
3. With front of gun tilted up remove cap and cartridge plug.
4. Attach static mix tube using plastic nut.
5. Attach spray tip nozzle and atomizer air.
D
FRONT
REAR
C
A
B
E
F
