RHINO LUMBERJACK 60, Руководство оператора

Страница: 107 / 132

OPERATION
LJ60/72 02-02 Operation Section 4-33
OPERA
TION
© 2004 Alamo Group Inc.
13.2 Hauling the Tractor and Cutter
Before transporting a loaded tractor and cutter,
measure the height and width dimensions and gross
weight of the complete loaded unit. Ensure that the
load will be in compliance with the legal limits set for
the areas that will be traveled through.
Use adequately sized and rated trailers and equipment
to transport the tractor and cutter. Consult an
authorized dealer to determine the proper equipment
required. Using adequately sized chains, heavy duty
straps, cables and/or binders, securely tie down both
the front and rear of the tractor utilizing the proper tie
down locations as specified by the tractor
manufacturer.
Arrange the chains so that when tightened, the chains
are pulling downward and against themselves.
Carefully tighten the securing chains or other fasteners
used as much as possible using boomers or binders
to apply maximum tension. Use extreme care when
attaching and removing the securing devices as the
extreme tension involved when released has the
potential to inflict serious injury.
While hauling the tractor and cutter, make occasional stops to check that the tractor and cutter have not moved
or shifted and that the securing chains have maintained tension. If during transport a hard braking, sharp
turning, or swerving action was performed, stop at the next safe location to inspect security of the load.