manualshive.com logo in svg

RHINO FM84, Руководство оператора

Поделиться
Скачать
RHINO FM84 Скачать руководство пользователя страница 82

Operation Section   4-8

FM84   08/01

© 2004 Alamo Group Inc.

OPERATION

OPERA

TION

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

REMEDY

BELT SLIPPAGE

Mower overloading, material too Reduce tractor ground speed but
tall or heavy

maintain full PTO rpm.  Cut material
twice, one high pass and then mow
at desired height.  Cut a partial swath.

Oil on belts from over lubrication Be careful not to over lubricate.

Clean lubricant from belt and pulleys
with clean rag.  Replace oil soaked
belts.

Belts hung up or rubbing

Check belts for free travel in pulleys
and belt guides.  Check under mower
and around blade spindle shafts for
 wire, rags, or other foreign material.
Clean all material from under mower.

FRAYED EDGES ON COVER Belt misaligned or belt rubbing

Re-align belt or guide.  Be sure belt

guide.

doesn't rub any other part while running.

Pulley misalignment

Inspect to ensure belt is running in
center of backside idler.  Shim idler
as necessary to align.

BELT ROLLOVER

Pulley misalignment

Re-align

Damaged belts

Replace belts.*

Foreign object in pulley grooves Inspect all pulley grooves for rust,

paint or weld spots and remove.

Worn pulley groove

Replace pulley

DAMAGED BELT

Rollover, high shock loads or

Replace belts.*

installation damage

BELT BREAKAGE

High shock loads

Avoid abusive mowing.  Avoid hitting
the ground or large obstructions.

Belt came off drive

Check drive alignment for foreign
material in grooves.  Ensure proper
tension.  Avoid hitting solid objects
or ground.

*Check broken belt for damage by laying it flat on floor.  If belt does not lie flat (has humps or twists), which
indicated broken or stretched cords, it must be replaced.

Содержание FM84





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды