![RHINO BLX 65 BMR Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/rhino/blx-65-bmr/blx-65-bmr_owners-manual_1452508004.webp)
4
CAUTION: Make sure you detach the motor before
taking the boat out of the water.When mounting
or detaching the motor, make sure, that the
battery is disconnected.
CAUTION!
When adjusting the tilt angle, avoid placing your
hands between the shaft and the hull of the boat – risk of
injury!
If the motor is to remain attached to the boat after
use, it must always be lifted out of the water via the
pivoting mechanism
.
2.4 Starting the motor (Fig. 4 & 5)
Press the release lever (A). Carefully push the motor into
direction (B) by the shaft let the height adjustment snap into
the steering unit (C).
2.5 Move the motor to the resting position (Fig. 4)
Press the release lever (A). Carefully pull the motor into
direction (B) by the shaft until it locks into place. Slide the
height adjustment into direction (B) and tighten.
2.5 Adjusting the depth
Hold the motor shaft
with one hand, then
loosen the depth
adjustment screw and set
the motor to the desired
depth.
Engage the depth
adjustment in the
steering unit (Fig. 6)
and then tighten. Then
align the motor head if
necessary.
2.6 Changing propellers
Detaching the propeller
Unscrew and remove the locknut using the propeller wrench
supplied, taking care to hold the propeller with one hand
to prevent it from revolving. Do not loosen the locknut with
a hammer or similar tool, as this may cause damage to the
locknut or shaft.
Once the locknut has been removed, the propeller can be taken
off easily. Verify proper fi t of the groove and shearing pin when
mounting the new propeller, otherwise the propeller will not
attach properly.
After using the motor, always check for fi shing line or weeds
that may have got caught in the propeller and remove, if
necessary.
CAUTION: ALWAYS disconnect the battery
prior to changing the propeller.
2.7 Electrical connections
(For 12V batteries only!)
Connect the red battery cable (A) to the positive battery
terminal (labeled (+) on the battery). Connect the black battery
cable (B) to the negative battery terminal (-).
5
C
4
B
D
A
6
Содержание BLX 65 BMR
Страница 38: ...38 4 DECLARATION OF CONFORMITY...
Страница 39: ...39...