Rhino Winch 13500lb, Руководство пользователя

Страница: 15 / 17

© Rhino Winch Co © Rhino Winch Co
15
13500lb - 175000lb - 20000lb
Maintenance
Check Before first use After each use Every 90 days
Check connections to make sure they are tight.
Replace damaged connectors.
√ √
Ensure there is no exposed or damaged wiring,
terminals or cable insulation.
√ √
Inspect rope for damage. Replace rope immediately
if damaged.
√ √ √
Keep entire unit free from contaminants. Use a clean
rag or towel to clean.
√
Check and insert / replace the battery of wireless
remote control.
√ √
Turn power off after use. √
Troubleshooting
Symptom Possible cause Remedy
Winch will not operate
Loose, cut or damaged wiring
Check all wiring carefully to ensure good
condition
The remote battery is critically low
Replace remote battery or use the wired
remote
Wireless signal strength is low
Decrease the distance between remote
and winch
Defective remote control
Test with the wired remote, replace
wired remotes
Runs in only one direction Loose, cut or damaged wiring
Check all wiring carefully to ensure good
condition
Will not free spool Free spool not dis-engaged Disengaged free spool
No Brake Disengaged free spool Engaged free spool
Winch runs in opposite direction
Motor leads crossed Reverse electric connections to motor
Solenoid control crossed Reverse black and red wires on solenoid
Remote control or trigger switch crossed Reverse electric connections
Motor runs extremely hot
Long period of operation Stop operation to let the unit cool down
Weight overload Reduce load