From the underside of the crossbar insert the phillips
screw into the hole provided and screw into the support
leg to secure the leg to the crossbar.
4
Insert the support leg completely into the crossbars.
3
5
Collect all mounting pads supplied and identify position codes and direction arrows on each pad. The arrow must
point to the front of the vehicle. The right hand side is the driver’s side.
The mounting pad position code is as follows:
FL - Front Left Side Pad
ML - Middle Left Side Pad
RL - Rear Left Side Pad
FR - Front Right Side Pad
MR - Middle Right Side Pad
RR - Rear Right Side Pad
Insert the mounting pad into the mounting pad recess. Using the mounting pad layout as a guide, place the pads
onto their respective positions.
6
1
Remove the roof rack attachment point covers, exposed
bolts and brackets. Store covers, bolts and brackets in a
safe place.
Note: The existing bolts and washers are
not used to fi t the mounting pads.
Place the 10mm large o-rings onto the protruding plastic
tubes.
2
FRONT OF VEHICLE
REAR OF VEHICLE
FR
FL
ML
RL
RR
MR
