Page 3 of 3
RCP63-BK Base Kit
Install crossbars as per crossbar individual instructions. RVL crossbars shown as example only.
11
Be sure fi xtures are secure before use.
Assemble the short mounts as shown.
7
Short
fi xed
mount
base
Short fi xed
mount rubber
Place the short fi xed mount rotation block onto the
assembly.
8
Short fi xed
mount base
rotation block
M6 curved nut
Using a
nutsert tool,
install the
nutserts into
the drilled
holes on the
vehicle.
9
Place the base
assemblies over the
installed nutserts. Fix in
place with an M6 torx
screw, spring washer
and M6 x 12.5mm fl at
washer.
10
Place the short fi xed
mount covers over
the installed torx
screws.
M6 x 16mm fl at washer.
