RHINO MOTION CONTROLS RMCS-3001, Инструкция по установке и технические характеристики

Страница: 9 / 11

RHINO MOTION CONTROLS
RMCS-3001
Brushless DC motor Driver
(Max. 48VDC and 5A per phase)
http://www.rhinomc.com
Page 9
BLDC Motor Drive [RMCS-3001]
3.4 Power supply Selection:
The general rule of thumb to get the most out of the motor is to drive it with a supply
voltage that is at-least 3 to 4 times its rated supply voltage. A DC regulated power supply
with good low-ESR decoupling capacitors on its output is recommended for best
performance of this drive.
3.5 LED Status and Error Codes:
There is a two LED on this drive for power and error status messages. Green LED is
provided for power and red LED is for error indication.
Table 6: LED Status and Error Codes
LED State Message
Green LED ON and steady Powered up and calibrated
Red LED Flickering randomly Current Trigger Level Achieved
Red LED blinking Short circuit on motor terminals or connection error
3.6 Parameter Settings:
Table 7: Parameter Control Settings
Resolution Description
Pot-1 Potentiometer for speed control
Pot-2 Current Setting (Inside chassis)
Potentiometer:
Clockwise (CW) rotation to increase speed
Counter Clock-wise (CCW) rotation to decrease speed