INSTRUCTION MANUAL FOR DISHWASHERS
x
The cycle ends with two short beeps. The
START
key
(3)
of the selected programme returns to
green and the display shows the message
‘
END
’
. The time bar flashes.
x
A few seconds after start-up, it is possible to start the wash cycle in advance by pressing the
START
key
(3)
.
x
In order to get rapid drying, immediately remove the rack from the machine at the end of the cycle.
Standard Programmes
Short wash programme for lightly soiled dishes.
Medium wash programme for averagely soiled dishes.
Long wash programme for heavily soiled dishes.
Continuous wash. The cycle can be stopped at any time by pressing the Start button.
After a short pause, the rinse stage will start. The cycle ends automatically after
12 minutes.
*Not available in VU-40 glasswashers
.
Automatic cycle start-up
This function is used to make the chosen cycle start automatically when the door
or hood
is closed.
To
enable,
proceed as follows
:
x
If not made available by default, the function must first be enabled via the settings menu.
x
With the appliance on and the door open
or hood is up
, press and hold (for at least five seconds)
START (3)
until
A
appears on the display.
x
To disable the function, with the door open
or hood is up
press
START (3)
again for five seconds.
x
Move the washing
and rinsing arms at right angles to the edge of the door or opening.
Drain
ing the dishwasher
x
Remove the
scrap screens and clean under running water.
x
Replace tub filter and scrap screens and close the door.
x
If necessary, extract the tub filter and clean
.
x
x
Press the
PROGRAMME SELECTION
key
(2)
until the display indicates
(dr)
on the display.
x
Press
START (3)
to start the
drain
cycle.
5
Drain and self-cleaning cycle to be used at the end of working day
.
Drain cycle.
Cleaning the dishwasher at end of day
x
Press
START (3)
to start the
self-cleaning
cycle.
Press the
PROGRAMME SELECTION
key
(2)
until the display indicates
(CLE)
on the display.
x
Once completed
ensure you replace the scrap screens and tub filter before next use
.
x
Close the door.
x
Remove the
scrap screens and tub filter and clean under running water.
x
Machine will go into standby on completion of drain cycle.
x
Machine will go into standby on completion of self-cleaning cycle.
