rheemthermal.com.au
INSTALLATION INSTRUCTIONS
CONTROLLER MOUNTING
Find a suitable location to mount the control box. Ideally, as with all pool equipment,
it should be installed out of direct weather and no closer than 3 metres from the water’s
edge and a minimum 600mm above ground. The power cable is 1.8m long and should
be plugged directly into a general power outlet, not into an extension lead.
PUMP CONNECTION
The circulation pump plugs into the 3 pin, 240V socket beneath the
DPi1 controller marked
‘PUMP CONNECTION’
.
HEATER INTERLOCK
Plug in the
‘HEATER INTERLOCK’
lead from the DPi1 controller to the female socket
on the side of the Rheem Thermal heat pump marked, “Rheem IQ
®
DPi Link”.
Note:
Damage caused by incorrect connections will void warranties.
Fix the mounting bracket to a solid structure via screws and wall plugs kit provided,
and slide the controller on, locking into place. Adjusting screws on the back of unit
to ensure snug fit. To remove unit, lift and gently pull away from structure.
Rheem Thermal
Heat Pump
Flow
Flow
Heater
Interlock
Pool / Spa
PLUG INTO
240V GPO
RHEEM IQ®
LINK DPi1
DIGITAL PUMP
INTERFACE
P/N: 26843
WARRANTY
This range of product is covered by a limited 2 year warranty against component failure or
faulty workmanship from the date of installation. A faulty unit should be returned in the first
instance to Rheem Thermal or the Rheem Thermal dealer from which the unit was purchased.
Damage to the unit due to misuse, power surges, lightning strikes or installation that is not in
accordance with the manufacturer’s instruction may void the warranty.
Warranty does not cover postage or travel costs to or from installation site.
If the power cord is damaged, do not use the controller; return the unit to Rheem Thermal
or the Rheem Thermal dealer from which the unit was purchased for repair.
Customer Record.
(To be retained by the customer)
Dealer/Installer Name:
Serial Number:
Date Installed :
RHEEM IQ® LINK DPi1
DIGITAL PUMP INTERFACE