Rheem RXRD-NDCM3, Руководство по установке, Страница: 2 / 12

STEP 1:
Immediately upon receipt, all cartons and contents
should be inspected for transit damage. Units with
damaged cartons should be opened immediately.
If damage is found, it should be noted on the
delivery papers and a damage claim filed with the
last carrier.
STEP 2:
Remove RETURN COVER, PANEL – TOP LEFT,
and PANEL – LEFT BOTTOM SECTION from the
unit and retain for reuse
(SEE FIGURE 1) . Retain
screws.
STEP 3:
Fasten RETURN COVER (SEE FIGURE 2) over
bottom return opening using retained screws (2 on
RXRD-NDCM3, 4 on RXRD-NFCM3).
STEP 4:
Remove screws from 3 sides of ROOF PANEL so
that it can be raised during economizer insertion.
STEP 5:
R e m o v e j u m p e r p l u g a n d c o n n e c t u n i t
ECONOMIZER PLUG to economizer mating plug
and slide economizer into unit. Save the jumper
plug in this compartment for diagnostic purposes.
2
FIGURE 1
RETURN COVER
PANEL - TOP LEFT
RE TURN COVER
FIGURE 2
A1005-01
A1005-01
PANEL - LEFT BOTTOM SECTION
ROOF PANEL
ECONOMIZER
(SEE BILL OF MA TE RIAL)
ECONOMIZER PLUG