Rheem RTE 3, Руководство пользователя, Страница: 7 / 16

7
Location of Unit
NOTICE: Unit must be installed in
a vertical position ONLY with the
water fittings pointing horizontally,
Do not install the unit where it
would routinely be splashed with
water. Electric shock may result.
1. Install the tankless water heater
as close as possible to the
hot water draw-off point, for
example, directly beneath the
sink or next to the shower stall.
2. Install the tankless water heater
in a frost free area. If frost may
occur, remove the unit before
freezing temperatures set in.
3. Leave a minimum of 12" of
clearance on top and bottom of
the unit for servicing.
Mounting The Water Heater
Mounting kit contains sheet metal
screws and supporting brackets in a
plastic bag.
These brackets can be attached to
the back of the heater and allows
the installer to secure the heater to
the wall without the need to open
the front cover.
Make sure to use only the brackets
and screws that are provided in the
mounting kit. The use of longer
screws may damage the unit and
void your warranty.
WALL
MOUNT
BRACKET
LOWER
MOUNT
HOLE
UPPER
MOUNT
HOLE
BACK PANEL
Figure 1