Air
Model Features
RAPM- JAZ Series
3
Model Features
RAPM- Series Condensing Units
1.
This unit contains a special scroll compressor that is
designed specifically to operate with R-410A refrigerants
and polyolester (POE) oils. The compressor is hermetically
sealed and incorporates internal high temperature motor
overload protection and durable insulation on the motor
windings. It is externally mounted on rubber grommets to
reduce vibration and noise.
2.
Compressors have an internal pressure relief assembly to
protect against excessive pressure differential.
3.
All refrigerant connections are on the exterior of the unit,
located close to the ground for neat appearing installations.
4.
Cabinet is constructed of powder painted galvanized
steel. The full wraparound louvered grille protects the coil
from damage.
5.
Copper tube—aluminum fin coils are used on all models.
6.
The control box is located in the top corner of the cabinet
providing for easy access through a service panel.
7.
Service valves are standard on all models.
8.
Power and control wiring are kept separate.
9.
Every unit is factory charged and tested.
10.
Separate compressor compartment for easy service
access.
11.
Drawn, painted base pan for extra corrosion resistance and
sound reduction.
12.
Automatic reset high and low pressure controls are
standard on all models.
13.
A liquid line filter drier is standard on all models (shipped –
not installed).
All controls and compressor are accessible
for servicing by removal of the service panel.
Drawn Painted Base Pan.