RH YOUNTVILLE 90100100001, Руководство пользователя

Страница: 15 / 26

IXTAPA FIRE TABLE OWNER’S MANUAL
15
CLEANING
Inspect the appliance before initial use. Clean the
appliance at least annually and have it inspected by
a qualified field service person.
Periodically examine the burner. If the burner is dirty,
clean it with a soft wire brush. Also examine the
area around the burner air shutter. Remove any dirt
or debris in this area. This will ensure long life and
trouble-free operation.
The easiest way to clean the fire table burner is to
let it cool completely off and spray the enclosure
off with water.
DO NOT spray water directly onto
the burner.
For routine cleaning of the fire table, wipe down
with a damp cloth or sponge. Avoid using any
cleaners as they may contain chemicals or color
that could cause discoloration. To remove stains,
use a Marble or Granite stain remover available at
any home improvement store.
When not in use and after cooling, cover your fire
table with a full length cover. The cover will help
protect your fire table from detrimental effects of
weather and environmental pollutants.
Before placing the cover on the fire table, make sure
the unit is shut off, the gas lines are disconnected
and that the unit has had sufficient time to cool.
Install the cover and use the tie-down straps to
secure it tightly to the unit to prevent wind from
blowing it off.
More frequent cleaning may be required as
necessary. It is imperative the control compartment,
burner and circulation air passageways of the
appliance be kept clean and free.
MAINTENANCE
Periodically check the hose connecting the propane
gas cylinder to ensure it is not cracked or damaged in
any way. All natural gas hook-ups should be serviced
and inspected only by qualified installers only.
Spiders and insects can nest in the burners and
block the gas and airflow to the burner ports. This
creates a dangerous condition that can result in a
fire from behind the valve panel. Inspect and clean
the burners periodically.
Any guard or other protective device removed for
servicing must be replaced prior to operating the
appliance.
If it is evident there is excessive abrasion or wear
of any of the components, if the fuel supply hose
is cut or cracked, it must be replaced prior to the
appliance being put into operation.
Inspect the fuel supply connection for signs of
leakage (including the hose for propane models)
before each use of the appliance.
Do not repair or replace any part of your fire table.
Have a qualified technician perform all service. Any
repairs made by a non-approved service technician
will void your warranty.
STORAGE
When your fire table is not in use, turn off the gas at
the source.
This appliance can be store indoors only if it has
been disconnected from its fuel supply.
Store propane cylinders outdoors in a well-ventilated
area out of reach of children. Disconnected cylinders
must have threaded valve plugs tightly installed
and must not be stored in a building, garage, or any
other enclosed area.
To extend the life of your fire table, protect and
cover it from the elements when not in use. Ensure
the appliance has ample time to cool off after
use and prior to installing storage cover. Damage
caused to storage cover due to heat or burns are not
covered by warranty.
FIRE TABLE
The fire table is warranted to be free from defects in
material and workmanship for one year from the date
of purchase.
If a part proves to be defective under normal use, the
part will be repaired or replaced. Our obligation under
this warranty is to repair or replace defective parts at our
discretion. If we determine that repair of a covered item is
not feasible, we reserve the right to replace the defective
merchandise with merchandise equal in value to the
original purchase price. Warranty repair or replacement
are the sole discretion of Eldorado Stone and this warranty
does not cover costs therein, including but not limited to:
freight, removal, re-installation, etc.
There will be no charge for parts on a covered item,
however, cost of labor is the responsibility of the owner.
Shipping and handling charges will apply to all warranted
replacement parts. The service agent may assess a
reasonable travel or mileage charge per service call.
This limited warranty applies only to fire tables normally
used for personal, family, or household purposes and
specifically excludes rental or commercial applications.
This warranty is non-transferable.
Decorative stones and decorative glass are not covered by
this warranty.
This warranty is void if the fire table has been subject
to negligence, alteration, misuse, repairs, dings, dents,
scratches, or incorrect and/or prohibited applications as
specified in the owner’s manual.
Natural gas lines must be installed by a licensed plumber
only or local gas company agent.
The original purchaser acknowledges and agrees that
this product is a handmade, hand-finished product. Each
piece is unique. Any samples provided are typical of
texture, finish, individual characteristics, and color but they
should not be considered exact representations of the
final product. There can be up to a 15% variation in color
and texture from piece to piece. In addition, shape detail
can vary as much as ¼" in size. The texture created by
entrapped air ranges from smooth to randomly indented.
Minor chipping, water staining, and non-structural hairline
cracks are also traditional characteristics of this product.
As with natural stone, color will vary on individual orders
and among individual pieces in the same order. As
with natural stone, excessive heat exposure may cause
discoloration. As fire tables age, color may lighten or
darken according to specific field or storage conditions
such as humidity, temperature, and exposure to sunlight.
BRASS BURNER
Manufacturer warrants the burner to be free from
defective material and workmanship for 10 years from
the date of purchase. The burner warranty covers
manufacturing defects only and does not cover defects
due to normal wear and tear; it does not warrant any
product or part that has been altered, accidentally
damaged, damaged in shipping, disassembled, modified,
misused, neglected, failure to maintain, not installed, or not
kept in continuous service after installation. Manufacturer’s
liability shall be restricted to the purchase price of the
product only and makes no other warranty, express or
implied, but not limited to, the implied warranties of
salability and appropriateness for a specified purpose,
with respect to its products and parts, whether used
along or in combination with others. Manufacturer is
free of liability for any damages caused by the unit,
as well as inconvenience expenses, material or labor
charges incurred by any service call, repair, removal or
re-installation of any unit. Incidental or consequential
damages are not covered by this warranty. All burners
must be covered when not in use or warranty is null and
void. Warranty does not cover damage to systems due to
debris in the gas lines or damage to system due to water.
Owner is responsible for reading and understanding
warranty for full terms and conditions. Manufacturer, at its
discretion, agrees to repair or replace defective product if
returned to manufacturer within the warranty period. The
respective warranty time periods are effective from the
original date of purchase. The warranty is non-transferable
and applies only to the original purchaser. In addition, this
warranty is automatically void if the unit’s serial number
has been removed or altered in any way.
No dealer, distributor, or other person has the authority
to represent or warrant burner product beyond the
terms contained within this warranty, and manufacturer
assumes no liability for such warranty representations. Any
questions concerning this warranty should be directed to
the manufacturer’s corporate office.
RETURN POLICY OF BURNER PRODUCT
Any burner product deemed by manufacturer as
defective and covered by the warranty may be returned
to manufacturer for assessment to determine if repair or
replacement is necessary. In order to return a product, you
must have a Return Merchandise Authorization number
(RMA#). Please contact a manufacturer representative
at the corporate office to obtain an RMA#. All returned
merchandise must have the RMA# clearly printed on the
outside of the package. Return shipping costs are the
purchaser’s responsibility. Manufacturer is not responsible
for product damaged or lost in transit. It is recommended
that return items are shipped via a delivery service that
can be tracked and/or insured to confirm receipt.
CLEANING, MAINTENANCE & STORAGE WARRANTY
15
F I R E TA B L E STA I N L E S S ST E E L B U R N E R