RECLAIMED RAILROAD TIE FLOOR LAMP
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED. SHUT OFF THE MAIN ELECTRICAL SUPPLY
FROM THE FUSE BOX OR CIRCUIT BREAKER PANEL.
This fixture has been rated for one (1) 100-watt maximum Type A
standard bulb OR 23-watt Compact Fluorescent bulb. To avoid
the risk of fire, do not exceed the recommended wattage.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov
THIS IS NOT A TOY AND HAS NO PLAY VALUE.
ASSEMBLY & INSTALLATION
CARE INSTRUCTIONS
Do not use polishes or cleaners on your lamp. Just wipe
clean with a soft cloth.
1. Carefully remove all parts from the box and remove all
plastic covering.
2. Align Legs E1, E2, E3.
3. Insert the Screw (F) in the Leg holes and tighten properly
using the Allen Key (G).
4. Insert the Harp (C) into the Saddle (D).
5. Insert the recommended bulb in to threaded socket.
6. Remove the Finial (A) from the Threaded Nipple (B) by
unscrewing in a counterclockwise direction.
7. Place the shade (not included) on the Threaded Nipple (B).
8. Reattach the Finial (A) and tighten to secure the shade (not
included) by screwing in a clockwise direction.
9. Plug in to proper electrical outlet and test fixture.
10.Assembly is complete.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
W A R N I N G S
All wires are connected. When unpacking, be careful not to pull
wires as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn o
ff
fixture and allow
it to cool prior to replacing the lightbulb. Do not touch or look
directly at the bulb when fixture is illuminated. Keep flammable
materials away from lit bulb.