RH.COM
REVISION 12-01-22
M E T I E R D O M E S H A D E T A S K F L O O R L A M P U N I T E D S T A T E S E N G L I S H
IMPOR TANT: PLEASE READ
PLEASE FOLLOW THE ASSEMBLY INSTRUC TIONS CLOSELY.
IMPROPER ASSEMBLY OR INSTALLATION CAN RESULT IN
PERSONAL OR PROPERT Y DAMAGE. MOUNTING HARDWARE
HAS BEEN PROVIDED FOR MOUNTING DIREC TLY TO A
JUNC TION BOX. UNIQUE, OR ALTERNATIVE, INSTALLATION
T YPES MAY REQUIRE DIFFERENT MOUNTING HARDWARE,
WHICH HAS NOT BEEN INCLUDED. ALWAYS CONSULT WITH A
LICENSED ELEC TRICIAN BEFORE INSTALLATION.
INSTALLATION BY A LICENSED ELEC TRICIAN IS STRONGLY
RECOMMENDED.
IMPOR TANT SAFE T Y FEATURES
BULBS
This lamp has been rated for up to one (1) 5-watt maximum
Type T LED lightbulb. To avoid the risk of fire, do not exceed the
recommended wattage.
DIMMER SWITCH COMPATIBILIT Y
This fixture is dimmer-switch compatible and may only be used with a
forward phase dimmer switch.
WARNINGS
All wires are connected. When unpacking, be careful not to pull wires,
as damage may result. Do not connect electricity until the lamp is fully
assembled. To reduce the risk of fire, electrical shock, or personal injury,
always turn off lamp and allow it to cool prior to replacing the lightbulb.
Do not touch or look directly at the bulb when lamp is illuminated. Keep
flammable materials away from lit bulb.
W A R N I N G : This product can expose you to lead,
which is known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information,
go to www.P65Warnings.ca.gov.
WARNING: STR ANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
ASSEMBLY AND INSTALLATION
SHUT OFF THE MAIN ELEC TRIC AL SUPPLY FR OM
THE FUSE BOX OR CIR CUIT BREAKER PANEL.
1. Carefully remove all parts from the box and remove all
plastic coverings.
2. Remove white plastic bushing from inside the bottom
opening of Lamp Pole (D) and top of Fixture Base (E)
before assembling.
3. Join Lamp Pole (D), Fixture Base (E) and Base Weight (F)
together. Slide Washer (G) over the threaded nipple which
protrudes to bottom of Base Weight (F). Screw Nut (H)
on the threaded nipple to secure Fixture Base (E) to Lamp
Pole (D). Tighten using T-Wrench (J) .
4. Pull the wire until tight.
5. Insert Bulb (I) into the threaded socket.
6. Plug into proper electrical outlet and test lamp.
7. Assembly is complete.
Adjustment:
1. Loosen Threaded Collar (C) in a counterclockwise
direction.
2. Adjust lamp by pulling or pushing Inner Pole (B) up or
down to the desired height.
3. Tighten Threaded Collar (C) in a clockwise direction or
adjust the shade position by swinging Lamp Arm (A) if
needed.
C A R E I N S T R U C T I O N S
Do not use polishes or cleaners on the lamp. Wipe clean with a
soft, dry cloth.