K N O X T A S K F L O O R L A M P
I M P O R T A N T S A F E T Y I N S T R U C T I O N S
1. Do not break or pull out LED panel.
2. Indoor use only.
3. Do not look directly at the light.
4. Keep lamp away from materials that may burn.
5. If the supply cord or adaptor is damaged, it must be replaced
only by service agent or a qualified technician.
W A R N I N G S
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and allow it
to cool prior to replacing the lightbulb. Do not touch or look directly
at the bulb when fixture is illuminated. Keep flammable materials
away from lit bulb.
W A R N I N G : This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
T H I S P R O D U C T I S N O T A T O Y A N D H A S N O
P L A Y V A L U E .
W A R N I N G : S T R A N G U L A T I O N H A Z A R D
Keep cord at least 3 feet away from cribs, bassinets, and toddler
beds. Keep out of reach of children under 3 years of age.
A S S E M B L Y & I N S T A L L A T I O N
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Remove red Plug Cover (D) from Plug (C).
3. Plug into proper electrical outlet and test fixture.
4. Assembly is complete.
TO ADJUST HEIGHT
1. Loosen Lamp Pole (A) by lifting Break (B) upward.
2. Adjust the lamp by pulling or pushing Lamp Pole (A) up or down
to the desired height.
3. Secure Lamp Pole (A) into place by pressing Break (B)
downward.
C A R E I N S T R U C T I O N S
Do not use polishes or cleaners on the lamp. Wipe clean with a soft,
dry cloth.