ASSEMBLY INSTRUCTIONS
1. Lay the headboard (A) and footboard (B) on a flat surface.
2. Attach the long guardrail (G) to the headboard (A) and the short guardrail (H) to the footboard (B). Refer to FIGURE 1.
3. Attach the threaded rods (1) into the fixed nuts in the post of the headboard/footboard by turning them manually. See FIGURE 2 and FIGURE 3.
NOTE
: The shortguard rail can be installed at either end of the headboard or footboard depending on your desired ladder location. When short
guardraill (H) is installed into the left side of the headboard or footboard, refer to option A and B. If, the guardrail is installed into the right side of
the headboard or footboard, refer to option C and D.
6
FIGURE 1
OPTION A
OPTION B
OPTION C
OPTION D
FIGURE 2
1
FIGURE 3
1
Fig.1
Fig.2
Fig.3
Fig.1
Fig.2
Fig.3
L A G U N A F U L L L O F T B E D - A S S E M B L Y I N S T R U C T I O N S
IMPORTANT
These bed parts can be cumbersome and heavy. Two people are therefore recommended for assembly to prevent personal injury and ensure the bed
parts are not damaged during the assembly process.
4 8
/
