Page 8 of 10
DETAIL E
STEP #3
INSTALLATION OF STABILIZER RAILS
INTO THE SIDE PANEL
STEP #3.1
On inside face of both side panels are pre-installed metal
brackets, designed to hold the stabilizer rails. Set both
ends of the stabilizer rails into brackets, as illustrated in
DETAIL E
.
STEP #3.2
Once the stabilizer rails are set, gently tilt the crib as
illustrated in DETAIL F, then fasten the stabilizer rails
with bolt together with plain washer and lock washer
provided, as illustrated in
DETAIL G
.
DETAIL F
DETAIL G
(CC) 1/4" X 13/16 " BOLT = 4 PCS
LOCK WASHER = 4 PCS
PLAIN WASHER = 4 PCS
ALLEN WRENCH = 1 PC
HARDWARE NEEDED FOR STEP #3:
