(AA)
STEP 1
LEG ASSEMBLY TO HEADBOARD AND END RAIL PANEL
HEADBOARD AND END RAIL PANEL ASSEMBLY
STEP 1.1
Gently lay the headboard and end rail panel on their backs on
a clean and non-abrasive surface.
STEP 1.2
Align and insert the threaded rod of the legs into the hole on
the bottom of the headboard and end rail panel and turn
clockwise to tighten. See
DETAIL A
.
STEP 1.3
Bring the headboard and end rail panel in upright position.
NOTE:
On both end of the headboard are holes for the bolt to pass
through that correspond to the holes located on both ends of
the end rail panel with pre-installed nuts.
STEP 1.4
Align the hole of the end rail panel with the holes of the
headboard then insert allen head bolt into hole and tighten
with allen wrench provided. See
DETAIL B
.
DETAIL A
HARDWARE FOR STEP 1
Allen Wrench = 1 pc.
(AA) 1/4" x 1 3/4" Allen Bolt = 4 pcs.
Lock Washer = 4 pcs.
Plain Washer = 4 pcs.
DETAIL B
6/11
Содержание BELLINA
Страница 1: ...1 1 1 11...
