RGMT RG-8031-11, Инструкция по эксплуатации

Страница: 3 / 18

BEFORE YOU USE THIS WATCH, IT IS
RECOMMENDED THAT YOU MANUALLY WIND
THE MAINSPRING TO START IT MOVING.
THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED
WITH A MANUAL WINDING MECHANISM.
WINDING THE MAINSPRING
1. Unscrew the crown by turning it
anti-clockwise.
2. When it is in position [ 1 ], turn the
crown clockwise to wind. Wind
5-10 times and it will start to move
naturally after shaking slightly.
3. Push the crown in then screw it
securely.
0
1
USING THE SCREW-DOWN CROWN
DO NOT PULL THE CROWN UNLESS IT IS
FIRST:
NOTE: Failure to SECURELY screw down the crown
after setting the watch may affect its water
resistance.
TO UNSCREW: Turn the
crown anti-clockwise until it
turns freely without tension.
GENTLY pull the crown out to
the other desired positions for
watch setting (see specific
operating instructions on the
following pages).
TO SCREW: Push the crown
ALL THE WAY IN (towards the
watch) THEN begin to turn
clockwise until it is securely
screwed down.
0
1
2 3