background image

Tiga Sub4 User Manual | Warranty

Tiga Sub4 User Manual

UM-TigaSub4-020-EU

23

Manufacturers Warranty

THIS GUARANTEE DOES NOT AFFECT YOUR LEGAL RIGHTS IN ANY WAY.

RGK Wheelchairs* provides a guarantee, as set out in the warranty conditions, for wheelchairs to its customers covering 

the following 

Warranty conditions

Should a part or parts of the wheelchair require repair or replacement as a result of a manufacturing and/or material 

fault within 24 months or for frame and cross-braces within 5 years after delivery to the customer, then the affected part 

or parts will be repaired or replaced free of charge.

 

For original spare parts which have been fitted at the customer’s expense, these will have a 12 months guarantee, 

(following the fitting), in accordance with these warranty conditions.

1.  To enforce the warranty, please contact the local reseller where the product was purchased with the exact details of 

the nature of the difficulty. Should you be using the wheelchair outside the area covered by the local reseller, repairs 

or replacement will be carried out by another agency as designated by the manufacturer the wheelchair must be 

repaired by a RGK Wheelchairs designated Customer Service agent, (dealer).

2.  For parts, which have been repaired or exchanged within the scope of this warranty, we provide a warranty in 

accordance with these warranty conditions for the remaining warranty period for the wheelchair in accordance with 

point 1).

3.  For original spare parts which have been fitted at the customer’s expense, these will have a 12 months guarantee, 

(following the fitting), in accordance with these warranty conditions.

4.  Consumable parts such as pads, tyres, inner tubes and similar parts are excluded from the warranty, except in the 

case that premature wear of the part is the direct result of a manufacturing fault.

5.  Claims from this warranty shall not arise, if a repair or replacement of a wheelchair or a part is required for the 

following reasons:
•  The product or part has not been maintained or serviced in accordance with the manufacturer’s 

recommendations as shown in the User Instructions and/or the Service Instructions.

•  Accessories have been used which are not specified as original accessories.

•  The wheelchair or part having been damaged by neglect, accident or improper use.

•  Changes/modifications have been made to the wheelchair or parts, which deviate from the manufacturer’s 

specifications.

•  Repairs have been carried out, before our Customer Service has been informed of the circumstances.

6.  This guarantee is subject to the law of the country in which the product was purchased from RGK Wheelchairs.

* Means the authorised RGK reseller from which the product was purchased.

Содержание Tiga Sub4

























Отзывы: