User Manual
Issue No: 14 | 2015
24
Procedure 7
This procedure includes the following:
Replacing the Front Castor Fork assembly and Castor Wheels
Replacing Fork Assembly
1. Remove cap Fig 22.
2. Remove the bolt and locknut that secure the front
fork assembly.
3. Remove the front castor fork assembly using 19mm
socket spanner downwards through the castor
housing noting any washer sequence.
4. Install the NEW front castor fork and reverse steps 2 -
1 to refit.
5. Repeat the procedure for the opposite front castor if
necessary.
Replacing Front Castor Wheels
1. Using two 4mm Allen keys, remove 1 of the 2 screws
that locate the castor axle.
2. Remove the castor axle by sliding it out. Remove the
castor wheel and spacers from the castor fork.
3. Install the NEW castor wheel, castor axle and
spacers to the castor fork, by reversing STEPS 1 & 2.
User Manual | Procedure 7
NOTE:
Bearings must be fitted by an authorised dealer.
Failure to do so will result in invalid warranty on
the parts.
RGK DO NOT recommend replacing the front
castor forks or castor wheels with a different size
other than what was originally supplied on the
chair.
By changing to a different size castor fork or castor
wheel will have an adverse effect on the running of
the chair and the end users balance.
CAUTION:
