2
10.
Never operate the saw under the influence of drugs, alcohol, or medication.
11.
Always carry the saw in its de-energized state.
12.
Keep the saw handles dry, clean, and free of oil or fuel.
13.
This saw is not insulated. Do not start cutting without first de-energizing electrical wiring near the cutting site or
imbedded in any concrete.
14.
Prior to cutting, plan your cuts to prevent pinching of the blade or personnel injury from falling material.
15.
Always hold the saw with both hands during operation. Use a firm grip on the handles.
16.
Never exceed the flow and pressure rating of the saw which is 12 gpm at 2500 psi.
17.
Do not exceed either the blade maximum operating speed of 3240 rpm or the blade manufacturer’s rated speed.
18.
Do NOT attempt to adjust the saw during operation.
19.
Keep clothing and all parts of the body away from moving parts of this saw when connected to a power source or
being used.
20.
Any slurry formed during wet cutting operations is very slick. Remove while still wet to prevent yourself or others
from slipping while cutting. Slurry that has been allowed to dry is very difficult to remove.
21.
Always shut off the hydraulic power and cooling water sources before disconnecting the hoses or servicing the saw.
Never remove fittings or components when hydraulic fluid is hot.
22.
Always shut off the hydraulic and cooling water sources when not using the equipment.
