RGC 6122225, Инструкция по эксплуатации, Страница: 6 / 28

2 SPECIFICATIONS
ORIGINAL INSTRUCTIONS
2.1 TECHNICAL DATA
The following specifications apply to the Chain Saw 8 GPM.
ENGLISH METRIC
Tool Physicals
Weight 9.5 lbs. (3.9 kg.)
Dimensions (with 16 in. bar) 31.75 x 10 x 8.5 inch (806 x 254 x 224 mm)
Hydraulic Requirements (8 GPM SAW)
Type of System Open-Center or Closed Center
Minimum Flow Rate 4 gpm (15 lpm)
Recommended Flow Rate 6 gpm (22.5 lpm)
Maximum Flow Rate 8 gpm (30 lpm)
Max Pressure Range 2000 psi (138 bar)
Back Pressure (Max) 200 psi (13.8 bar)
Hose Length (Max) 50 ft. (15 m)
Couplings ½” HTMA flush face
Operation (8 GPM SAW)
Chain Speed (Max) 3527 FPM (1075 M/Min)
Operation (4 GPM SAW)
Chain Speed (Max) 1814 FPM (552 M/Min)
Vibration and Sound
Vibration level a= 5.65 M/S^2
Sound pressure @ 1Meter 88 dba
2.3
RECOMMENDED HYDRAULIC OIL
Viscosity 140-225 SUS @ 100
°
F (28-45 cSt @ 38
°
C)
40 min. SUS @ 210ºF (8 min. cSt @ 99ºC)
Flash Point 340ºF min. (170ºC min.)
Pour Point -30ºF min. (-34ºC min.)
Many types of compatible hydraulic oil are available through your local dealer/distributor. As an original equipment
manufacturer, RGC uses a Grade ISO VG 32 hydraulic turbine oil.
Hydraulic oil types are too numerous to list in this manual. If you have any question concerning the type of oil suitable for C150
operation, please consult your local supplier or Reimann & Georger Corporation for details.
2.4
NAMEPLATE AND SERIAL NUMBER TAG
It is important to identify the saw completely and accurately whenever ordering spare parts or requesting assistance in service.
The saw has a product nameplate that states the model and serial numbers. The saw label should appear as the sample nameplate
shown in Figure 2-1. Record the model and serial numbers for future reference.
5