8
Support Guide
Q� The power won’t turn on�
→
The battery may not have been charged properly. See “Q. The battery cannot be charged. ” on
page 10.
→
It is possible that the Battery Module protection circuit has been activated. Perform the recovery
procedure by following the steps below and check that all functions have been restored.
■ Recovery Function
1. Detach the Light Module and Battery Module.
2. Remove any moisture inside each module with a dry,
lint-free cloth. Let the modules dry completely.
3. Normal function will be restored when the system is
charged with the AC adapter and charge plug.
○
An AC adapter is not included. Use the optional AC
adapter (RGB-PDAC01). A commercially available USB
PD AC adapter (30W, 15V, 2A) can also be used.
Frequently asked questions
Troubleshooting
If they have been exposed to salt water,
wipe the salt off with a cloth moistened
with fresh water or wash the salt under
running water, and then let them dry
completely�