RGBlink VENUS X1PRO-E, Быстрый старт

Страница: 11 / 31

Address
：
S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925788216
Email: sales@rgblink.com http://www.rgblink.cn
10
->Image Select Mode 2
Image 1 Source DVI1
Width 1300
Height 1080
->H Pos 0
V Pos 0
EDID >>
Reset Parameters
H Pos 0
V Pos 0
EDID >>
Reset Parameters
4. VENUS X1PRO-E can be setting the Image 1-4 parameter directly.
Single Image Switching
Default DP for the current input source, if need switch other signal, for example, DVI, push the DVI button.
DP button light will be off after pushing the DVI button, and DVI button light will be on if the DVI signal is
effective and stable. If the DVI signal is invalid or no input, DVI button light will flash.
Same with above, switch the signals among DVI1, DVI2, DP and 3 option signals.
VENUS X1PRO E can be setting the Image 1-4 parameter directly.
Two Images Setting
VENUS X1PRO-E can be setting the Image 1-4 source parameters directly. X1PRO-E has 4 output channels, each
channel allows 4 layers, all 4 layers can be scaled, re-positioned. Here’s an example of how to set 2 layers:
1. Press <Menu>, default into <Standard>, turn the rotary knob to <Image Select>, press the rotary knob to
confirm, and select <Mode 2>, details refer to above “Image select”.
2.The screen would show the follows a symmetrical image.
Images Parameters Setting
Setting the <Image 1Source> to <Image 4 Source> parameters as actual needs.