MSP 214 DVI to Fiber
Function Block Diagram
Operating Principle
MSP 214 DVI to Fiber transmitter is connected to
computer, media player or HD camera, etc. User can
connect the DVI interface on MSP 214 DVI to Fiber
panel to PC with DVI cable, then connect the
computer or media player, and MSP 214 DVI to
Fiber transmitter to power supply. After the
connection, the EQ Blance function starts
automatically on MSP 214 DVI to Fiber transmitter.
In order to avoid the damage of device, please use the
standard power adapter. Fiber interface is used to
connect to MSP 214 Fiber to DVI receiver.
Operation Manual
Function Block Diagram
Operating Principle
MSP 214 Fiber to DVI
MSP 214 Fiber to DVI receiver is connected to
television (monitor) or LED screen which has DVI
interface. Connect the fiber interface to the other fiber
interface on MSP 214 DVI to Fiber transmitter with
fiber cable, and then connect the DVI interface on
MSP 214 Fiber to DVI panel to display device. After
the connection, the EQ Blance starts automatically on
the MSP 214 Fiber to DVI receiver. In order to avoid
damaging the device, please use the standard power
adapter.
Address: S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian
Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected]
http://www.rgblink.com
MSP 214 Quick Start
Rev 1.3
Page 2 of 2
Common Questions and Solution
Signal indicator light is off or blinks
1. Check whether connect the DVI signal;
2. Check whether the input signal, input wire and
output wire are normal, the interfaces are in good
connection;
3. If above without problem, then the signal
indicator is damaged.
Note: The indicator beside fiber interface is off
when the device is in normal operation. It will light
or blink if the fiber cable is in poor connection.
12V power interface poor contact
1. Check whether the power interface is in good
connection, if the interface is not tighten, screw
it again.
2. Check whether any problem with adapter head,
replace it if there is any problem.
3. Check the power connector is loose, if so, please
send to professional personnel for repair.
Power indicator light is off or blinks
1. Check whether plug in the power cord, and has
power supply;
2. Check whether the power cable is connected, and
in good connection;
3. If above without problem, then the power
indicator is damaged.
