Address
：
S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
10
How to Realize Signal Auto Take
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and choose [AUTO TAKE].
3. Push the [TAKE] button to confirm, and enter to the auto take setting. Push the [NEXT]
button to choose “ON” or “OFF”, then push the [TAKE] button to confirm. System default the
status is “ON”, and when switch the signal, user need not to push the [TAKE] button.
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and choose [LOCK].
3. Push the [TAKE] button to confirm. Push the [NEXT] button to choose “ON” or “OFF”, then
push the [TAKE] button to confirm. Push the [MENU] button for 3 seconds to unlock panel.
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and choose [HOT BACKUP].
3. Push the [TAKE] button to confirm, and enter to hot backup function setting. Push the [NEXT]
button to choose “ON” or “OFF”, then push the [TAKE] button to confirm.
Inputs 1 ~ 8 are any combination of backup, it will recall another backup if one signal has
problem. The detailed parameters can be set on windows control program, and invalid for
button operation.
