request
for
music
made in the Netherlands
allows you to add an extra oscillator to the one you’re working with
for an extra fat sound.
More than that - connected to the
DETUNE
knob is a
MULT
(multiplier
knob). With the DETUNE knob itself you can easily create that fat analog
sound, especially when using the Sawtooth for instance.
The MULT knob multiplies the range of the DETUNE knob, so when you
combine settings on both you can easily dial in an extra oscillator with
one or more octaves above or below the ‘main’ oscillator.
Alt/option clicking on the DETUNE knob will reset to only one oscillator.
m o d u l a t i o n
Of ourse you can further find an input jack and knob to set the pulse
width, as well as modulation jack and level setting for your square wave.
For Frequency modulation like vibrato or audio rate modulation, there’s
also an FM input and level knob.
g l i d e
On top of that the 2VCO has glide/portamento on board as well.
Next to the GLIDE knob there’s a switch that allows you to have GLIDE
on OSC1, both or OSC2.
p h a s e m o d u l a t i o n
Signal into this input and attenuated by the knob to the right, modu-
lates the phase of oscillator 1. You can actually use OSC 2 output to mod-
ulate OSC 1. Or go really modular and put some audio rate signal in there.
4
6
5
3
4
5
7
6
