1. Warranty Information
•
Warranty Statement
The RFL3200 UK-10 Unmanaged Ethernet Switch comes with a three-year warranty from the date of shipment and is
warranted against defects in material and workmanship for three years. During the warranty period RFL will repair or, at its
option, replace components that prove to be defective at no cost to the customer, except the shipping cost of the failed
assembly. All equipment returned to RFL Electronics Inc. must have an RMA (Return Material Authorization) number,
obtained by calling the RFL Customer Service Department at 973.334.3100 or e-mail
A
defective part should be returned to the factory, shipping charges prepaid, for repair or replacement FOB Boonton, N.J.
RFL warrants product repair from three-years from the date of repair or the balance of the original factory warranty,
whichever is longer.
This warranty does not apply if the equipment has been damaged by accident, neglect, misuse, or causes other than
performed or authorized by RFL Electronics Inc.
This warranty specifically excludes damage incurred in shipment to or from RFL. In the event an item is received in
damaged condition, the carrier should be notified immediately. All claims for such damage should be filed with the carrier.
NOTE
If you do not intend to use the product immediately, it is recommended that it be opened immediately after receiving and
inspected for proper operation and signs of impact damage.
This warranty is in lieu of all other warranties, whether expressed, implied or statutory, including but not limited to implied
warranties of merchantability and fitness for a particular purpose. In no event shall RFL be liable, whether in contract, in
tort, or on any other basis, for any damages sustained by the customer or any other person arising from or related to loss of
use, failure or interruption in the operation of any products, or delay in maintenance or for incidental, consequential,
indirect or special damages or liabilities, or for loss of business or other financial loss arising out of or in connection with
the sale, lease, maintenance, use, performance, failure or interruption of the products.
•
FCC Statement
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
RFL3200 UK-10 User Guide
RFL Electronics Inc.
October 6, 2010
2
973.334.3100
