5G MIMO Directional Panel Antenna
698-3800 MHz
LTE-XPOL-002-5G Series
rfi.com.au
Copyright RF Industries Pty Ltd 2022. Subject to change without notice.
Asia Pacific | EMEA | Americas
INS-44783-1
Wall Mounting
Follow the same instructions as for pole mounting except mount pole bracket to wall using appropriate fixing screws.
CONNECTING THE ANTENNA
1. Connect the antenna cables (terminated with SMA type connectors) to 5G / 4G data card or modem. For devices using
other connector types, 2 x patch leads (optional / not included) will be required to connect the antenna (SMA) to the device
(phone or data card). Please contact your retail or network provider for availability.
2. Connect the data card or modem to your computer and follow the manufactures instructions to open the management
software so that the screen shows the received signal strength. You may need to turn off your system and power up again
after you have connected the antenna.
3. Place the U-bolt around the pole and insert into pole
saddle & pole bracket .
4. Route cables down pole and secure using either cable
ties or electrical tape.
3.1.) Screw M6 nut & w asher
onto the U-bolt and t ighten
nut s o antenna i s securely
clamped onto pole.
COMPLETING THE INSTALLATION
Please check the following on completion of the installation:
1. Ensure all bolts & nuts are tight.
2. Ensure the cables are routed in a safe manner and is not a future hazard around the home or workplace.
3. Ensure all cable connection to the device are tight.
IMPORTANT:
Some data cards or modems will only detect the connector of an external antenna on power up.
NOTE:
Signal strength may be displayed either graphically with bars where more bars mean stronger signal strength or
as a signal level value in dBm where the closer to 0 (zero), the better. For example, a signal level of -75dBm is better than
a signal level of -85dBm.
