ASSEMBLY INSTRUCTIONS
continued
STEP 2:
WITH THE ANTENNA ASSEMBLY LOCATED ON THE MOUNTING TUBE ATTACH THE 2 LARGE CLAMP PLATES
AND TIGHTEN THE M16 NUTS CLAMPING THE ANTENNA ASSEMBLY TO THE MOUNTING TUBE. TIGHTEN TO
70Nm (50 lbf.ft)
148-174 MHz
FSA10-41-DIN
MOUNTING TUBE
(NOT INCLUDED)
LARGE CLAMP PLATE
ANTENNA MOUNTING HARDWARE HAS BEEN
DESIGNED TO ACCEPT MOUNTING TUBE
DIAMETERS IN THE RANGE OF 75-115mm (3"-4.5")
MOUNTING TUBE LENGTH TO BE SIZED BY
INSTALLER TO SUIT INSTALLATION METHOD.
PLEASE NOTE: MOUNTING POLE NOT SUPPLIED.
INS-40101-6
©RF Industries Pty Ltd 2009
PAGE 3 OF 4
www.
RFIAmericas
.com
