2.
Wall Mounting
- Choose a suitable place (refer to Installation of Antenna) and fix the wall bracket using the
mount accessories.
- Hang the Panel antenna in the on the screws.
COMPLETING THE INSTALLATION
If you have not already done so, you can connect the cable to the antenna and your data devise.
IMPORTANT:
For maximum signal, we recommend external mounting to reduce signal losses caused
by building structures etc.
You may now adjust both the direction and the angle of the Panel antenna to fine tune the alignment of the antenna
to receive maximum signal (see Mounting Section).
Please check the following on completion of the installation:
-
Ensure all cable connections are tight.
-
Ensure all screws / nuts are tight.
-
Ensure the cable between the antenna and the device has been routed in a safe manner and is not a
future hazard around the home or workplace
-
Ensure the exposed cable junction at the bottom of the antenna has been wrapped with the included
weatherproofing tape.
