RFD900x Data Sheet
www.rfdesign.com.au
4
Last update 09/07/2018
2
Software/GCS Support
The asynchronous software solution (see “Useful Links”) is multi-node meshing solution for RF Design
X series modems.
The modems feature a boot loader to facilitate field upgrade of the modem firmware via the serial
port. This is most easily performed by using the latest version RFD Modem tools (see “Useful links”)
Parameters such as power levels, air data rates and serial speeds etc can all be custom set by the user
using the AT Command set, the RFD Modem Tools V2.6 or later and APM Planner. (Note some
parameters are only settable using the AT commands and that RT commands for changing remote
settings is not supported)
The default serial settings for the asynchronous firmware is:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
