Our equipment is manufactured in accordance with worldwide quality standards and fulfils the requirements
of all certificates and homologations required for this kind of equipment.
This device was designed and manufactured in accordance with ISO-9001 procedures, using the latest
generation components.
I.
Purpose of use
The SMART mini HD amplifier is destined for use in antenna systems receiving terrestrial analogue and
digital TV HD programs in detached houses, residences, terrace houses, hotels, boarding houses, holiday
centers, schools, hospitals, etc. - even situated in places with difficult reception conditions, where the
received signals have different levels and are coming from different directions.
SMART mini HD enables to receive these signals, to equalize their levels and to amplify them.
The SMART mini HD amplifier can be used as an independent unit, as well as a part of a bigger head-end
station.
II. Amplifier connection and activation
Never connect or start the SMART mini HD amplifier until the installation of the receiving antennas has been
completed. In order to select the correct antenna type you should precisely examine the receiving conditions,
that is:
1. Connect antennas to the amplifier inputs:
• TV bands IV and V antennas (470...862 MHz) to
UHF1
,
UHF2
inputs,
• TV bands III antennas (174…230 MHz) to
VHF
input,
• FM antenna (47...108 MHz) to
BI/FM
input.
Caution:
a) It is recommended to connect to
UHF 1
input the antenna receiving the biggest number of TV channels.
b) It is possible to connect to UHF1, UHF2, and UHF3 inputs antennas with preamplifiers.
c) 12 VDC supply voltage is connected to VHF, UHF 1 and UHF 2 inputs by pressing down a switch beside
input.
d) AUX input is universal input. To this input is possible to connect additional devices (video camera with
A/V modulator, satellite receiver, etc.)
