Check that signal and data are locked and signal strenght is acceptaple . The acceptable range (green beam)
is 22…88% (-70… -25 dBm). Yellow beam means that signal range is out of acceptaple range.
Note! The beam “meter” is only directive. Go to STREAMING/PROGRAMS/Update and check if channels
are in the list.
When settings are ready, go to TUNER
MANAGE and
select Save Session
.
IMPORTANT! Save Session must be selected for each tuner separately.
Tuner 2 ( DVB-S only) settings are made similar way.
4.2 DVB-T/C tuner
Select Tuner 3 to set parameters of terrestrial or cable signal.
Set the correct parameters and press “Update”. The “Status” screen displays.
Note! The frequency is entered in kHz.
Check that signal and data are locked and signal strenght is acceptaple . The acceptable range (green beam)
is 22…88% (40 – 55 dBuV) . Yellow beam means that signal range is out of acceptaple range.
Note! The beam “meter” is only directive. Go to STREAMING/PROGRAMS/Update and check is channels
are in the list.
When settings are ready, go to TUNER
MANAGE and
select Save Session.
Tuner 4 settings are made similar way.
RF-Tuote Oy, Joensuunkatu 13, 24100 Salo, tel. +358-2736 6360, fax. +358-2-736 6360,
,
www.rf-tuote.fi
