NOTE! LNB supply voltage must be fed only from one tuner to each LNB. For other receivers must be
selected Power OFF or use DC-blocked splitters.
Power voltage is connected to the left side AC connector.
PC is connected to RJ 45 connectors with ethernet cable.
3. Setting up the system
The system is programmed with PC via a Web browser.
1. Connect Ethernet cable from RJ 45 connector to computer.
2. Open the web browser like IE, Firefox, Chrome etc…
3. Write to address field 192.168.0.145 and then enter.
4. Unit asks the password.
The factory default password is
Ramsen8262
At the front page can be seen the status of receivers (input frequency, BER, ) and select the menu language
(EN or DE)
4. DVB / FM configuration, please separate RFQ-848 configuration manual.
4.1 Tuner
To set tuner parameters go to INITIALIZATION. For satellite signal set all parameters, for terrestrial/cable
signal only frequency is needed.
Set the correct parameters for tuner 1. and select SCAN. Repeat same for tuners 2, 3 and 4.
When all parameters are selected press SAVE CHANGES.
RF-Tuote Oy,Joensuunkatu 13, 24100 Salo, tel. +358-2736 6360, fax. +358-2-736 6360,
