RF-Star EFR32BG22 Скачать руководство пользователя страница 30

Страница: 30 / 94

EFR32BG22

www.szrfstar.com

V1.6 - Jun., 2022

Shenzhen RF-star Technology Co., Ltd.

Page 29 of 93

5 AT Command

5.1 AT Command Format

Table 3. AT Command Format Table

Type

Command

Format

Description

Test Command

AT+[x]=?

This command is used to query the parameters and value range of the

commands.

Query Command

AT+[x]?

This command returns the current value of the parameter.

Configure Command

AT+[x]=<…>

This command is used to set user-defined parameter values.

Execute Command

AT+[x]

This command is used to perform the function of immutable

parameters.

Note:

This command can be sent through APP and the serial port.

The default baud rate of the serial port is 115200,

8-bit data bit, 1 stop bit, no parity.

Not every command has the above four types of commands.

The AT command must be

capitalized.

It must end with a carriage return and line feed (CRLF).

No need to add

CRLF for “+++”

The <> returned in the query AT command indicates the optional parameters, and [] indicates the required

parameters. If all parameters of the command are optional parameters, at least one parameter is needed to be filled,

otherwise, it is also regarded as a command error.

Example: AT+ADS=<0,1>,<0,1>,<10,10240>, you can fill in AT+ADS=,,500.

The parameter positions that are not filled in the optional parameter command must

be reserved

. Refer to the

previous example.

The parameters in any command cannot contain invisible characters such as spaces and tabs.

The setting value can not be exceeding the settable range of the parameters.

Содержание EFR32BG22































































































Результаты поиска

Содержание EFR32BG22

Отзывы:

Похожие инструкции для EFR32BG22

Бренды по названию

Популярные бренды

RF-Star EFR32BG22, Руководство пользователя

Результаты поиска

Содержание EFR32BG22

Отзывы:

Похожие инструкции для EFR32BG22

Бренды по названию

Популярные бренды