WIFI-RF
DS-WIFI-RF-3
Installation of the WIFI-RF:
Please follow the steps below accurately and IN ORDER :
1. Screw the antenna onto the WIFI-RF.
2. Connect the ETHERNET cable to the WIFI-RF.
3. Connect the ETHERNET cable to any free port on your router.
4. Connect the power supply to the WIFI RF.
WAIT 30 SECONDS
—
for the WIFI-RF to register on the network.
5. Press and hold the CONFIG button on the back of the WIFI-RF for 3 seconds
—
data
LED will flash.
6. After you release the CONFIG button wait while your WIFI-RF auto-configures to op-
erate on your home network.
7.
When the auto configure process is complete then the ‘Data’ LED will stop flashing.
8. Install the APP on your phone.
Downloading the APP:
From the Google Play or the iStore - search for RF Solutions or RFRemote and you
should find our free app, download and install. Please see page 5 for app connection
instructions.
9. Pairing process for buttons on the app will be as per your receiver instructions.
Notes on location and antenna:
A. Try to choose a location for your WIFI-RF which is not too close to walls and/or large
expanses of metal work as this will reduce the operational range.
B. Try to keep the antenna vertical - or perpendicular to the maximum required range.
NOTE: The WIFI-
RF has a very long range and therefore you shouldn’t need to worry
about to much any installation location. You can always call our technical support helpline
if you are having trouble
—
Technical support: +(44)1444 227909.
See installation diagram overleaf….
