RF SOLUTIONS TAURUSDIN Скачать руководство пользователя страница 2

TAURUSDIN

 

Quick Start Guide

 

QS-TAURUSDIN-2 

 

Factory Default Modes of Operation 

SLIMDIN is factory shipped with the following configuration. 

All Relays Momentary operation. 

RF MODE is FM. 

WATCHDOG is DISABLED. 

SLIMDIN can be Configured to Several Modes of operation 

Menu 1: configures Relay outputs Operation according to the Table below.  

Menu 2 configures Time Delays on the Relay Outputs.  

Menu 3 configures the RF MODE. 

Menu 4 configures Watchdog. 

Note: 

For Information, please see Datasheet or our online Videos!

 

RF Signal LED 

Flashes briefly when a compatible RF signal is received (even when transmitter is         
unpaired).

 

Indication LEDs 

Normal Operation: Indicates the output relay status. 
Self Test Mode: indicate Received RF Signal Strength.

 

Self Test / Walk Test Mode 

To enter Press and hold Learn and Mode Switch together then apply power.  

The module will now perform the following  
1.

Operate Relay’s 1

-4   

2.Await user press M Switch 
3.Momentarily Operate LEDs  1-4, then RF Signal LED 
4.

Enter Walk Test Mode , LEDs’ 1

-4  indicate RF Received signal Strength 

Note:

 

It is recommended for reliable operation to have at least one LED illuminating 

Battery 

Low 

or 

Recharging

RF Transmit

   (Green LED)

TAURUSDIN

 

Quick Start Guide

 

QS-TAURUSDIN-2 

Restore to Factory Default Settings 

This completely erases, timers modes, Watchdog  and resets the Module to Factory  
Defaults; 
1.Press and hold Mode Switch for approx.10 seconds.  
2.When All LEDS Fast Flash together al user configuration is reset 
Note: 

This does not Erase Paired Transmitters.  

To erase all Transmitter Pairings and you must also “Erase all Transmitters”

 

Battery 

Low 

or 

Recharging

RF Transmit

   (Green LED)

Operation

 

Recharging using USB Cable  

Connect using the USB Type C       
Connector  

Low Battery: If battery requires recharging 
Low Battery LED illuminates for 3 seconds 
after each operation. 

When Charging  the 

RED 

Battery LED     

Flashes slowly to show charging is in        
progress. When fully charged the 

GREEN 

LED 

is illuminated.  

Wireless Recharging  

Taurus is compatible with the QI standard 
(Most mobile phone standard Wireless 
charging pads) 

Recharging the Battery  

Taurus contains an internal  Lithium battery which can be recharged via the USB       
connector or, using a wireless charging pad.  

Отзывы: