TRAP-SHUFFLE: Game Simulator
QS-TRAP-SHUFFLE-R1
Wiring a Plug
The Receiver is supplied With a 3 core cable where:
·
BROWN—12V
·
GREEN/YELLOW—0V
·
BLUE—Trigger Wire
A plug can be wired to the cable to be connected to many TRAP models. The image
below shows wiring examples for two common TRAP manufacturers.
Status LEDs
Momentary/Latching Jumper Links
Reed Switch (for easy pairing)
Learn Button
NO/COMM/NC Relay
Terminal
Power In 12-32V
RELAY 4
RELAY 2
RELAY 3
NO
NC
COMM
Power LED
Antenna Connection
Buzzer
12V
0V
Receiver Wiring
This diagram show the standard
wiring configuration.
This may need to be adapted to fit traps
of other switching types.
WƌŽŵĂƟĐ,ŝƌƐĐŚŵĂŶŶϰƉŝŶ
You can find an instruction video with pairing instructions at the link below or via the QR
code. https://www.youtube.com/watch?v=ihe98aBVF7Y
This system is not compatible with the standard TRAP systems as it uses specifically
designed firmware for the flush functionality in both the transmitters and receivers.
