EZTEXT
DS-EZTEXT-6
Insert Simcard Here
1. Slide retaining clip to the Left and
open.
2. Place Nano sim on base.
3. Close Lid and slide to the Right to
lock.
Ordering Information
PART No
Description
EZTEXT
GSM telemetry system IP68 enclosure
BAT-EZTEXT-2
Optional lithium battery 950mAH
PSU-12V1A-IP
Power supply IP67
CBA-UFLSMA
Cable assembly for external antenna
CBA-EZTEMP2
Temperature sensor cable
Insert SIM card
Please note:
•
Insert nanoSIM Card before applying power (standard 3 Volt SIM only).
•
The message memory of the SIM card should be clear before it is fitted.
•
Ensure that the SIM card has not been PIN code protected!
•
Beware of Pay-as-you-go SIM which require regular top-up to remain active.
•
It is recommended to bar Incoming voice calls to the SIM card to avoid error messages being
sent back to the user. This can be achieved by calling the service provider.
The SIM card should be inserted into EZTEXT before applying power
•
RF Solutions recommends O2 and Vodaphone SIM card and has carried out extensive testing
using the SIM cards we have for these two networks.
•
Problems have been identified with Orange SIM cards with this product.
•
No guarantee can be given for the operation of this product with any network except those
that have been tested by RF Solutions.
The EZTEXT unit can be powered from 9 to 24Vdc.
Inputs are VOLT free.
Outputs are Relay Changeover Contacts as shown below.
Supply
Terminals
1 2
Inputs
1 2
Outputs
Connect inputs/outputs and power connections
