RF Linx 2400 D Series, Руководство пользователя

Страница: 12 / 18

USER’S GUIDE
10
Powering Up and Indicator Lights:
Indicator LEDs on Tunable Controller:
TX PWR RX CHANNEL Condition
- GREEN GREEN 1 thru 14 RX Mode
RED - - 1 thru 14 TX Mode
- - - - Fault 1
- GREEN GREEN - Fault 2
When DC power is applied to the Tunable Controller it will query the Antennafier for a Built in Test (BIT) and
receive it’s previous Tuned channel on the two segment display. Also, the green RX LED and PWR LED
should be “ON”. The red TX light will only turn “ON” whenever the amplifier senses a RF level greater than
+2dBm on it’s TX input port. Durning normal RX/TX operation of the radio, these two LEDs flicker back and
forth.
If Fault 1 occurs, check to see that power is applied or if there is a potential “short” on the coax between the
Controller and Antennafier
TM
.
If Fault 2 occurs, Antennafier failed BIT test. Check coax cable connecting these devices.