RF IDeas RFID1356i-232, Руководство пользователя

Страница: 23 / 36

© 1996-2005 RF IDeas, Inc. All rights reserved
Strip Leading Parity bit count
The indicated number of Leading Parity bit(s) are ignored. There are typically only 1 or 2 leading parity
bits.
Strip Trailing Parity bit count
The indicated number of Trailing Parity bit(s) are ignored. There is typically only 1 trailing parity bit.
The following keystrokes are sent ahead of card data
You may specify up to 2 keystroke characters that will be inserted in front of the card data. Note there
are 3 special characters (hex 01, 02, 03) that can be specified. These add an extra measure of difficulty
in reproducing card data directly from the keyboard. It may be useful when using the proximity reader as
a logon device. Please see application note for more details.
Send ID Code
Since there are two fields of data (ID and FAC) and sending at least one is necessary, this field really
implies send the ID and not the FAC data. If both fields need to be sent, you need to select the ‘Send
the FAC code’ checkbox.
Send FAC code
Selecting this checkbox will cause the FAC code to be sent.
Bit count of ID portion only
This field is used to define the bit count of ID portion of the card data. To retrieve this data properly, you
will need to also indicate and strip the Leading and Trailing parity bits.
Enable FAC/ID character
This checkbox indicates that a separator character will be used between the FAC and ID codes.
This char sent between FAC & ID
This field holds the character that will be placed between the FAC and ID codes. Note there are 3
special characters (hex 01, 02, 03) that can be specified. These add an extra measure of difficulty in
reproducing card data directly from the keyboard. It may be useful when using the proximity reader as a
logon device. Please see application note for more details.
Force data to length
Zeroes are added to the front of the data to create a specific length. For example, if the data were 567
and the length is set to 6, the output will be 000567.
ID fixed to this length
Zeroes are added to the front of the ID portion of the data to create a specific length.
FAC fixed to this length
Zeroes are added to the front of the FAC portion of the data to create a specific length.
Disable appending keystroke
This checkbox tells the device to not append a character to the end of data.
This keystroke appended to data
If the previous checkbox is not selected, this character will be appended to the data. Note there are 3
special characters (hex 01, 02, 03) that can be specified. These add an extra measure of difficulty in
reproducing card data directly from the keyboard. It may be useful when using the proximity reader as a
logon device. Please see application note for more details.